| Conditions of Use: |
Alternator |
|---|---|
| Usage: | Common Units |
| Output Type: | AC Single Phase |
| Cooling Method: |
Water Cooling |
| Installation Method: |
Fixed |
| Generator Type: |
Diesel Generator |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier 
The Model LX706 is an Autamatic Engine Control Module. The module is used to automatically start and stop the engine,indication the operational status and fault conditions,automatically shutting down the engine and indicating the engine failure by LED on the front panel
Main features:
1 With the core of microprocessor, the screen is LED icon display, touch the buttom to operate;
2.Power supply range (8-35)VDC,adapt to 12V or 24V satarting battery environment;
3.With power, speed, temperature/pressure, liquid level sensor input ports for digital display of electrcity;
4.Able to detect and display the data of generator voltage(V), frequency(Hz), engine temperature( ºC), oil pressure(kpa), speed(rmp), total running time(H), battery voltage(V),fuel level(%);
5.Parameters setting: power voltage, battery voltage, speed, temperature, pressure and liquid sensor;
6.Achieve the flowing alarm or warning: low oil pressure, high water/cylinder temperature, over speed, low speed, emergency stop, fail to start, fail to stop, high/low power voltage, high/low frequency, high/low battery voltage, low fuel level;
7.With ETS and idle control function;
8. 3 kinds of operation: manual, automatic, stop;
9.Set the controller as generator controller(not chose the power voltage input )by the software, adapt to control the water pump, etc;
10.Red light-emitting diode(LED) on the panel to display operation and alarm status;
11.A variety of temperature, pressure, oil level sensor can be used directly and also can self-define parameters;
12.Temperature sensor , oil pressure sensor and and temperature alarm, pressure alarm respectively in parallel to provide the datas as well as incres the level of protection;
13. A varirty of successful start conditions(speed sensors, fuel pressure, power generator) optional;
14. 4 fixed reply output ports (fuel output, start output, shut down output, idle output);
15.A programmable output, can set the public alarm output, fail to stop output, preheat output or idel control output ;
16.Allow users to change the setting parameters , record in the internal FLASH memory. It won't lost though the system is power off. All the parameters of the controller can be adjusted on the front panel or via the LINK programming port to set parameters by testing software of the PC(using our company's SG72 adapter). The PC need only a USB port. The parameter can be set on the real machine with battery or no battery. The USB of PC machine supply working power to the controller for setting up the parameter;
17.Modular design, flame-retardant ABS plastic shell, embedded in installation, compact structure, samll size,single-chip control, stable performance and easy operation.
| Working Voltage | DC8. 0V to 35. 0V, Continuous Power Supply |
| Overall Consumption | standby mode: 12V:0.3W 24V:0.4W |
| working: 12V:1W 24V:1.1W | |
| AC voltage Input | Single phase 2 Wire 15V AC - 360 V AC (ph-N) |
| Alternator Frequency | 50/60Hz |
| Speed Sensor Voltage | 1V --24V(effective value) |
| Speed Sensor Frequency | maximum 10kHz |
| The maximum total run time | 99999.9 hours (After the decimal point is 1/10 hours,Six minutes |
| once changes) | |
| Start Relay Output | 1Amp DC28V B+ power supply |
| Fuel relay output | 1Amp DC28V B+ power supply |
| Shutdown relay output | 1Amp DC28V B+ power supply |
| Idle speed relay output | 1Amp DC28V B+ power supply |
| Programmable relay output | 1Amp DC28V B+ power supply |
| Switch input port | After B - effective |
| Overall Dimensions | 97mm x 78mm x 44mm |
| Panel Cutout | 78mm x 66mm |
| Working Conditions | Temperature:(-25~+70)ºC Relative humidity:(20~90)% |
| Storage Conditions | Temperature:(-30~+80)ºC |
| Protection Level | IP55:When waterproof rubber seal installed between the |
| controller and panel fascia | |
| IP42:When waterproof rubber seal is not installed between the | |
| controller and panel fascia | |
| Insulation Intensity | Object:input/output/power |
| Quote standard:IEC688-1992 | |
| Test way:AC1.5kV/1min leakage current:1mA | |
| Weight | 0.13kg |
Warranty
The products will be tested stricly one by one before delivery.
Germany production processes and quality standards to guarantee the good quality.
The warranty period is 12 months from shipping, but excludes the case of damaged by people.
Please help us to find out the problem, and we will offer free components for service.
All products will be well packaged and will not be damaged in transit.
FQA
1.How to buy your product?
You can place an order directly through the start order of Made in china
2.Do buyers need to contact the seller after placing an order?
No, we will contact you as soon as possible by made in china and prepare to ship.
3.How long does it take to receive the product after placing an order?
1-2days, after your order, we will contact you and tell you the specific time.
4. For example, MOQ is 1, how can I purchase it?
5. Are you a manufacturer or trading company?
We have large factorys, R&D teams and foreign trade elite teams.
6.How spare parts supply?
We can send u free spare parts during warranty by DHL
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}